High Performance 1/4" Water Flow Switch Water Flow Switch Water Flow Control Sensor for Water Dispenser water flow switch sensorFeatures:When the water flows in the preset flow channel, it pushes the magnet to displace. When it moves to the corresponding reed- tube, the reed- tube conducts after sensing the field. When there is no water flow, the magnet returns to its position under the thrust of the spring, and the reed- tube is disconnected after the corresponding reed- tube cannot the field.Thread: G1/4-inch, flow: 300ml/min, response time: less than 1s.Lightweight, reasonable size, stable performance, low water pressure start-, easy to install, safe to use.Can be perfectly used for water dispenser, water purifier, water vending machine, Made of material, which is sturdy and in use.Specifications:Material: plastic Body size: approx 6.2x2.8x1.6cm/2.4x1x0.63inApplicable water quality: turbidity less than 1; Fe-, C-o & Ni- less than 0.3 L Applicable water pressure: equal or less than 0.8mpaApplicable water temperature: 550 C humidity: less than 85%Storage temperature: -2050℃Thread: G1/4 flow: 300ml/minResponse time: less than 1sSwitch type: Normally openLength of wire: 50cmCable- connection strength (outlet end of the body) : Exert 20N-10s tensile force along the of the Apply 20N-10s pulling force along the vertical direction of the (no damage at the connection)Hydrostatic pressure: O pen at 1.05MPa for 5 minutes (no leakage or damageVoltage resistance: applied between live- parts and non-live- partsDC160V, 1 min or DC200V, 1 s(No flicker or breakdown closing current: 0.5A load current :1AOn resistance :0.12Q-Disconnect resistance :10120Power connection capacity :0.2PFP